Wake On Lan
Turn your PC remotely
Procedure with WOLUse the standard Wake on LAN (WoL), an Ethernet technology to turn a computer remotely from another computer. The WoL is implemented in the motherboard. We need the card receives a signal called "magic packet" (magic packet).How to Turn your PC remotely , for example, to run in your absence automated tasks?
* Connect the computer that sends the signal on the same network (LAN) than to light.
* Make sure you have the MAC address and IP address of the computer to turn it on.
* Check the compatibility of its network card by going to
Device Manager / Network card.
* Check compatibility of your BIOS.
Download Software * WOL, filling out all fields: MAC address, IP address, Subnet Mask: 255 255 255 255, Local Subnet sebd Options and Remote Port 8900.
* Wake Me Up Click.Procedure on website There are also websites that allow you to wake the computer by sending a Magic Packet online, eliminating the need to configure as above.
* Wakeup is Wan: http://wakeonwan.webou.net
* Wake On Lan Center: http://www.wolcenter.com
* Depicus: http://www.depicus.com/wake-on-lan
* Wake up PC. : Http://www.reveilpc.comAmong the advantages: it is not necessary to buy specific hardware. All you need is a compatible motherboard and a PCI NIC. To take advantage of Wake On Lan over the Internet, you must still activate in the BIOS.Also remember to configure the router as follows: the UDP port 9 (port used by the site ReveilPC example) should be redirected to the address of the computer to activate remotely.It is not possible, directly on some of these sites, schedule a date and start time.
Turn your PC remotely
Procedure with WOLUse the standard Wake on LAN (WoL), an Ethernet technology to turn a computer remotely from another computer. The WoL is implemented in the motherboard. We need the card receives a signal called "magic packet" (magic packet).How to Turn your PC remotely , for example, to run in your absence automated tasks?
* Connect the computer that sends the signal on the same network (LAN) than to light.
* Make sure you have the MAC address and IP address of the computer to turn it on.
* Check the compatibility of its network card by going to
Device Manager / Network card.
* Check compatibility of your BIOS.
Download Software * WOL, filling out all fields: MAC address, IP address, Subnet Mask: 255 255 255 255, Local Subnet sebd Options and Remote Port 8900.
* Wake Me Up Click.Procedure on website There are also websites that allow you to wake the computer by sending a Magic Packet online, eliminating the need to configure as above.
* Wakeup is Wan: http://wakeonwan.webou.net
* Wake On Lan Center: http://www.wolcenter.com
* Depicus: http://www.depicus.com/wake-on-lan
* Wake up PC. : Http://www.reveilpc.comAmong the advantages: it is not necessary to buy specific hardware. All you need is a compatible motherboard and a PCI NIC. To take advantage of Wake On Lan over the Internet, you must still activate in the BIOS.Also remember to configure the router as follows: the UDP port 9 (port used by the site ReveilPC example) should be redirected to the address of the computer to activate remotely.It is not possible, directly on some of these sites, schedule a date and start time.
source: here
