How to install Parking Distance Control (PDC) option

Tricks of BMW car

Instructions:

1. Removing the rear bumper completely (not just the black rub strip)
2. Running a wiring harness thru the bumper.
3. Removing and replacing the rub strip with one designed to accomodate the ultrasonic       sensors.
4. Drilling a 40 mm (about 1 1/2 in.) diameter hole below the right rear tail light to pass the wiring harness thru (a very scarey operation, for me, at least. Like performing surgery on your baby!).
5. Removing the rear package shelf (which means removing the rear seats, head restraints, C pillar panels, child seat tethers, etc.)
6. Installing a small speaker next to the brake light on the rear panel.
7. Running a second wiring harness from the trunk into the passenger compartment and along the rear window to connect to the speaker.
8. Tapping into the fuse block above the battery.
9. Running the power harness across the back of the trunk to the left side of the car to tap into the I-bus wiring.
10. Mounting the PDC control unit above the battery.
11. Re-assembling everything.

How to Edit a PDF Document

Tricks of Pdf documents

Instructions:

1.

Begin by downloading the Nitro PDF Professional software.  After you've downloaded the program, follow the instructions to install it. Once you've finished, open Nitro PDF.

2.

Click on the "Open" icon at the top of the program (the folder that is half-open). Search for and open the PDF that you wish to edit.

3.

Click the "Insert and Edit" tab at the top of the program. Once you've done this, select the "Insert" option found in the "text" box. This option will have a large "Ti" icon above it.

4.

Scroll down through your PDF and select any text you wish to edit. You can also delete text or add text to any portion of the document. To edit the text, right-click on the portion you wish to edit. In the drop-down box, select "Edit Text." Then simply edit your text as you would in any word-processing program.

5.

Use the other boxes at the top of the screen to add charts, pictures and other items to your PDF if you choose to do so. For the most part you will probably only want to edit the text of a PDF. However, Nitro PDF does give you the option to make other additions as well.

6.

Save the document as you would any word-processing document (hit Control + "S" or click the "Save" icon at the top of the program) and you will be finished.

10 ways to make more money from your blog even in recession

Tricks of earning money 

How to earn more money during recession?
1) Search for more money opportunities: I am considering blogging opportunities. All online job opportunities that requires no or very less investments.

2) If you own a blog, think to start another one. This will take some time to see the results but will be helpful to double the income if the recession period is too long.

3) If you are selling 1 ad space on your site, make it 2 or 3 ad spaces. Even if you think ads are distracting to your readers, forget this thought at least for some time i.e. till recession period.

4) Look for more publisher ad opportunities. If you are running Google Adsense on you blog why not think to join any new publisher ad network like CPM ad networks.

5) Approach to more advertisers directly to place ads on your blog. Offer some discount in recession period. Instead of stopping the complete business everyone think to cut the cost in recession. So your discount offer might be appealing to advertisers.

6) Think about freelance writing opportunities. Write some guest paid posts on other blogs. You will get money as well as some exposure to your blog.

7) If required spend some money on online marketing even if you have not spend a dime before. But keep the eye on ROI. If no ROI, stop spending.

8 ) Look for some affiliate deals: Sell some books on your blog niche topic.

9) If you are expert in some topic don’t hesitate to write book on this topic. Keep your books short and cost effective so that people can buy them even in recession. People starve to increase sell in recession period by any means. So your business ideas or expertise can help them in recession.

10) Look for part time job opportunities: If only blogging income is not sufficient for your living, think of some more job opportunities. May be in companies interested in your skills. More part time or contract job opportunities get created in recession period.

How to be a Successful Entrepreneur

Tricks of earning money

Here are some important reasons I found, why you are not a successful entrepreneur:

1) You don’t have multiple game plans:
Have multiple game plans. If one fails other can succeed. Same thing applicable for your earning potential from your web business. Don’t rely on single revenue source like Google. Diversify your portfolio.

2) You don’t learn from your mistakes:
Learn to learn from mistakes. Mistakes can teach you great things probably no one can teach. Small or big, try to avoid same mistake again.

3) You don’t network with others:
Though I feel myself shy mixing with strangers, I personally think we should try to make as many friends as we can. Friends are great helping hands. You don’t know which friend will come for your help in any worst situation.

How to use your ipod as a hard drive

There are two ways to put your iPod into Disk Mode:

The iPod appears to your computer and use it like a floppy disk/portable hard drive.

1.Through iTunes:

• In iTunes, select iPod in the Source pane and click the Summary tab.
• In the Options section:
• check "Manually manage ..."
• check “Enable disk use” (if not already)

·         Click Apply.

You'll see a slider that allows you to set how much disk space is allocated to music
and data.

2. Through the iPod (not connected):

• Turn the Hold switch on, then

How to reset and or restore your iPod

You need to restore or reset it.  Here's how to do that:

Reset an iPod:

• Toggle the Hold switch to on, then back to off (none of the red is showing).
• Press and hold down the Menu and Select buttons (as shown in the picture) for 6-10 seconds, until you see the Apple logo.
• For many problems, you may have to do this several times.  The iPod may be hung up on several things so you have to tell it: "Reset that.  Now reset this. Yes, reset that too" and etc.

Restore an iPod:

    Warning: When you restore and iPod, you...... delete everything on it (songs, pictures, movies, files, games, firmware, etc.).

 Hey! That means any stuff that's on the iPod, but not

How to Rename Your iPod, iPad or iPhone

Tricks of iPOD

1.  Turn on your computer and open the iTunes application
   
2. Connect your iPod to your computer. Wait until you see your iPod appear in the iTunes Source list. In this example, our 60GB Video iPod is just called "iPod." That's boring. Let's change it.

   3. Double click on your devive. It's name should now be

How to download free movies on iPod Touch

Tricks of iPOD

                                                                                                                                                   

So:

• Go to Cydia Community Sources.
• Add source apt.modmyi.com to get dTunes.
• Bossprefs Safari DL control.
• Safari download plug-in.

Movie page will be tinyurl.com/ipodmovies . After getting all these apps, watch the video below on how to download movies directly on the iPhone/iPod Touch.

source: http://ipodtouchtricks.net

How To Downgrade iPhone iPod Touch Firmware

Tricks of iPOD iPHONE

Downgrade iPhone-iPod Touch 

There are two ways of doing so:
1. Launch Cydia, and if you see something like this on Cydia homepage, “this device has SHSHs on file for iPhone OS: 3.0, 3.1, 3.1.2, 3.1.3” (Note: 3.0, 3.1, 3.1.2, 3.1.3 are the SHSH file saved for different firmware, its OK even if you have the last SHSH on file), then you do not required to do anything.

2. If such message is not displayed then tap on the “make my life easier” button on Cydia homepage. This will save the current SHSH on file on Saurik’s server, and now you can see that message on top of Cydia homepage.

After saving SHSH on file, you can follow these steps to downgrade the firmware:

    1. Go to C:\Windows\System32\Drivers\etc\hosts on Windows or /etc/hosts on Mac.

    2. Edit host file and add 74.208.10.249 gs.apple.com.

    3. Put iDevice in DFU mode.

    3.1 Connect iDevice to computer.

    3.2 Turn off iDevice.

    3.3 Hold power button and home button simultaneously for 10 seconds.

    3.4 Release power button, but not home button.

A USB device will get recognized, and iTunes will detect the iDevice.

NOTE: If you see the restore logo on the screen then your iDevice is in recovery mode and not in DFU.

4.   Install old firmware’s IPSW from iTunes and enjoy.

However, as they say “precaution is better than cure”, so next time do not upgrade to new firmware right away, instead wait for new jailbreak.

source: http://ipodtouchtricks.net/

How to install multiple versions of IE on their machine

Tricks of web programming

How to install multiple versions of IE on their machine?

As designer you care to test your Web documents on various versions of Internet Explorer (IE). 

You can install multiple versions on your machine including self IE7.0, IE6.0, IE5.5, IE5.01, IE4.01, IE3.0.

(Note however that versions 3 and 4 are completely obsolete, and in versions 5 and 5.5 are not far off to obsolescence, either!) .

We recommend you Tredosoft Multiple_IE versions which have the advantage of taking into account the conditional comments. 

For Windows Vista or XP, it is also possible to install IETester, a program that embeds several versions of Internet Explorer in a single interface.

Install Internet Explorer (4-7) on Linux: IEs4Linux

see more : here

How to remove the border

Tricks of CSS

How to remove the border (blue) around link images?

Just in CSS you can reset the property "border " and apply it to images (<img>) contained in links (<a>):

a img {border: 0;}

or equivalent:

a img {border: none;}

How to prevent the right button in yoyr blog

Tricks of web programming

Prevent copying

To prevent too easy to copy content and photos in a blog by clicking the right mouse button, insert the following code before  </ head>    :

<script language="JavaScript1.2">
ejs_nodroit function ()
{
alert ('Not allowed');
return (false);
}
document.oncontextmenu = ejs_nodroit;
</ script>